Liaocheng Xinju Special Steel Co., LTD.,

PRODUCT CENTER

Mobile

+8619153115539

410s Stainless Steel Sheet

Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel.

Classification ：

Stainless Steel Flat Plate

E-mail

PRODUCT DETAILS

Product Information

Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.

Standard	ASTM,AISI,SUS,JIS,EN,DIN,BS,GB
Material	201/202/301/302/304/304L/316/316L/309S/310S/321/409/ 410/420/430/430A/434/444/2205/904L etc.
Finish(Surface)	No.1/2B/NO.3/NO.4/BA/HL/Mirror
Technique	Cold Rolled / Hot Rolled
Thickness	0.3mm-3mm(cold rolled) 3-120mm (hot rolled)
Width	1000mm-2000mm or custom
Length	1000mm-6000mm or custom
Application	Stainless steel sheets can apply to construction field, ships building industry, petroleum & chemical industries, war and electricity industries, food processing and medical industry, boiler heatexchanger, machinery and hardware fields. Stainless steel sheet can be made accordingto the customer's requirements. Fast delivery. Quality assured.Welcome to order.

Technical data

Martensitic stainless steel sheets AISI 410

Chemical Composition of 410
Grade	The Element (%)
Grade	C	Si	Mn	P	S	Cr
410	0.08 - 0.15	≤1.00	≤1.00	≤0.035	≤0.030	11.50 - 13.50

Equivalent Materials

Grade	GB	DIN	AISI	JIS
	1Cr13	1.4006	410	SUS410

410S is annealed, or softened, to make it less brittle. This is done by heating it to between 1600 – 1650°F (871 – 899°C), then air cooling it slowly at room temperature to relieve cold-working stresses.

Sometimes, if excessive large grains are encountered after annealing mildly cold-worked material, the annealing temperature should be decreased to a range of 1200 – 1350°F (649 – 732°C) range. However, it should never be increased to 2000°F (1093°C) or above due to embrittlement, which is the partial or complete loss of the material’s ductility, the opposite of the desired result of annealing 410S.

For maximum corrosion resistance to chemical environments, the 410S surface should be free of all heat tint or oxide formed during the annealing or hot working process. It is essential that all traces of oxide and surface decarburization be removed by grounding or polishing all surfaces. Afterwards, parts are immersed in a 10% to 20% nitric acid solution followed by a water rinse. This is to ensure the removal of any residual Iron.

After this step, stainless steel 410S parts are generally considered able to undergo welding by common fusion and resistance techniques, though special attention is paid in order to avoid brittle weld fractures during fabrication and to minimize discontinuities.

The main difference between stainless steel 410 and 410S is that 410 is a basic, general purpose, martensitic stainless steel that can be hardened whereas 410S is a lower Carbon modification of 410 stainless steel, more easily welded but possessing reduced mechanical properties. 410S stainless steel can be easily formed by drawing, spinning, bending, and roll forming.

pplications using 410S Chromium ferritic stainless steel have considerably increased in recent years in chemical industries as well as oil or gas transportation industries. Experiments to determine phase transformation temperatures are ongoing to determine the alpha to gamma transformation temperatures for this alloy in different cooling conditions. Results will determine how 410S can be best used in these industries.

Factory

Liaocheng Xinju Special Steel Co., LTD., a comprehensive company operating high-quality steel, the geographical location is superior, the transportation is very convenient. The company has a complete and scientific quality system, integrity, strength and product quality have been recognized by the industry. Always adhere to the purpose of high quality, low cost, fast pace and excellent service.
He has over 15 years of export experience serving a wide range of customers from different sectors. Such as the United States, Europe, the Middle East, Southeast Asia, Africa, South America and other markets. Annual exports exceed 400,000 tons.

Packaging & Delivery

Packing: Waterproof Paper, Steel Strip Packed and other Standard Export Seaworthy Package, or customized package.

Delivery Time: 7-15 days after get deposit.

Application

Due to the many great features of stainless steel, it is widely used in many industries. It includes constructions, home appliances, automobiles, kitchen accessories, mechanical structure, decoration engineering, chemical industry, etc. Let's have a brief review.

Certificate

Liaocheng Xinju Special Steel Co., LTD.,has a strict quality control system that closely monitors every step of warehousing, inspection, and packaging. No errors are allowed, and unqualified products are not allowed to be stored. Shandong Chengshun Metal Materials Co., Ltd. is deeply trusted and supported by customers with excellent product quality and excellent service.

FAQ

Q: How can l get your quotation as soon as possible?

A: The email and fax will be checked within 12 hours, meanwhile, the Skype, Wechat and WhatsApp will be online in 24 hour. Please send us your requirement and order information(Steel grade, size, quantity, destination port), we will work out a best price soon.

Q: How do we trust your company?

A:We specialize in steel business for years, headquarter locates in Liaocheng city, Shandong province. You are welcome to investigate in any ways, by all means, you could place an order in Alibaba with trade assurance which could secure your payment.

Q: How could you guarantee your products?

A:Each piece of products is manufactured by certfied workshops, inspected according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.

Q: Do you accept the third party inspection?

A: Yes, absolutely we accept.

Q: Do you provide samples? Is it free or extra?

A: The sample could can provide for customer with free, but the courier freight will be covered by customer account.

Q: Will you delivery the goods on time?

A: Yes, we promise to provide best quality products and delivery on time. Honesty is our company's tenet

Stainless Steel Flat Plate